A screw clamp instead of a spring, and no thickness figure
An under-desk headset hook clamped by a screw rather than a spring, with silicone rubber where the headband rests — the cheapest holder here, and the only clamp-on one with no thickness range.
JAKO screw-clamp aluminum alloy headset hook
Best for: A desk you have already measured, where the simplest and cheapest sound mounting is enough.
This is the one holder in this hub that states a screw clamp rather than a spring. The difference is not cosmetic: a spring grips only within the range it was wound for and mounts in a second, while a screw is tightened by hand onto whatever the desk happens to be.
That matters more here than it would elsewhere, because JAKO publishes no thickness range at all — the only clamp-on holder on this shelf without one. The listing says the clamp “can be easily tightened based on the thickness of desk, and allow it firmly fixed on most table”. The buying tip at the top of this hub is to check exactly that figure before ordering; the Celerion and EURPMASK spring-clamp hooks publish 0.47 to 1.57 in and 0.31 to 1.57 in.
The arm is aluminum alloy with silicone rubber where the headband sits, which is the cushioning this hub compares, and JAKO states it mounts without glue to desks, cabinets, glass, monitors and shelves. On load it says only that the alloy “makes it to support a varied weight of headphones”, while suggesting a backpack or a large suitcase — the NEETTO hanger is the one listing here that publishes a number. At about $7 it is the cheapest holder on the shelf.
Read on the day this page was built: $7 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Best for: A desk you have already measured, where the simplest and cheapest sound mounting is enough.
Prices quoted in this text were read on 2026-10-13. The live price is at the top of the page.
JAKO does not publish a range. The listing says the clamp "can be easily tightened based on the thickness of desk, and allow it firmly fixed on most table" — which is the figure the buying tip at the top of this hub tells you to check, and the one this listing leaves out. For comparison, the Celerion and EURPMASK spring-clamp hooks publish 0.47 to 1.57 in and 0.31 to 1.57 in, and the NEETTO clamp up to 1.97 in.
They fail differently rather than one being better. A screw clamp holds at whatever thickness you set it to and does not relax; a spring clamp mounts and comes off in a second, but only grips within the range its spring was built for. On an unusually thin or unusually thick desk, the screw is the one that can be made to grip.
The listing suggests "backpack or a large suitcase" but publishes no load figure. The NEETTO hanger in this hub is the one that states a number, 5 kg (11 lb); treat the JAKO as a headset hook.
A solid North American walnut base and cradle on aluminum alloy support rods, hand-polished and wood-wax finished, arriving fully assembled — the most expensive stand in this hub.
Best for: A desk where materials and finish matter as much as function, and paying more for walnut is the point.
A clamp-on holder that flips over to work either as an under-desk hanger or an above-desk stand, adjustable between 6.5 and 10.2 in, taking desks up to 1.97 in — and the one listing in this hub that publishes a weight limit.
Best for: Anyone who does not yet know whether they want the headset above the desk or under it.
The one holder in this hub that clamps to the side of a monitor instead of a desk, with a silicone-coated cradle and a stated panel range of 0.2 to 0.7 in.
Best for: A desk with no spare edge and no spare surface, where the monitor is the only thing left to hang from.
A desktop-less electric frame adjusting between 28.3 and 46.5 in with four memory presets, sized for tops from 39.4 to 63.3 in and rated to 176 lb — with no manual override published.
Best for: Keeping a desktop you already own and replacing the frame underneath it.
A three-piece 24 V lift motor kit sold in two hexagon-hole sizes, with a hand controller carrying presets and a sedentary reminder — and no brand, no force rating and no stroke published.
Best for: A frame whose hexagon drive shaft you have already measured, where the original part is no longer sold.
A 24 V, 60 W linear actuator sold as a recliner motor, rated to 6000 N with a 230 mm (9 in) stroke at 5 mm/s, limit switches and IP44 — a general-purpose part, not one made for a desk.
Best for: A qualified installer investigating a replacement motor when the original manufacturer part is unavailable.