Claims a low center of gravity without publishing a weight
A freestanding aluminum and ABS stand with a curved plastic cradle designed to protect the headband sponge, and a base the maker describes as low center of gravity without putting a figure to it.
Lamicall aluminum and ABS desktop headset stand
Best for: A desk where the stand is part of the furniture and the headset is taken on and off all day.
This hub’s opening argument is that stability comes from a weighted base rather than the shape of the arch. Lamicall answers it in words — the stand has a low center of gravity, designed “to provide a safe and stable foundation for your headphones” — and then, in the same bullet, calls itself “lightweight and disassembled design”. Both phrases are the maker’s. Neither a weight nor a base width is published, so the claim cannot be checked on the page.
What can be read is the contact point. The part where the headphones rest is premium ABS with a curved surface, stated to protect the sponge of the headband against scratching — which is the slow failure this hub compares stands on, and the reason the buying tip asks where the cushioning actually sits rather than where it is visible.
The compatibility list runs to AirPods Max, Sennheiser, Philips, AKG, beyerdynamic, B&W, HyperX, Razer, Logitech, Audio-Technica and ROG, which with no cradle dimension published is a statement about intent rather than a measured fit. The shape has a stated origin, which is rare enough to repeat: Lamicall designed it “according to the look of the birds robin”. At about $16 it costs nearly twice the New Bee aluminum stand, which publishes its dimensions.
Read on the day this page was built: $16 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Best for: A desk where the stand is part of the furniture and the headset is taken on and off all day.
Prices quoted in this text were read on 2026-10-13. The live price is at the top of the page.
Lamicall states that a low center of gravity is designed "to provide a safe and stable foundation for your headphones", and in the same bullet calls the stand "lightweight and disassembled design". The two phrases pull in opposite directions and the listing publishes neither the weight nor the base width that would settle it. The New Bee stand in this hub publishes its height and a 3.7 in square base; this one publishes the intention.
Lamicall says so outright: the stand "is research and designed according to the look of the birds robin". It is one of the few listings on this shelf that explains its own shape, and the curve it produces is the part that touches the headband.
Lamicall names AirPods Max, Sennheiser, Philips, AKG, beyerdynamic, B&W, HyperX, Razer, Logitech, Audio-Technica and ROG headsets as compatible. With no cradle width or height published, those names are the only fit information on the listing.
An under-desk headset hook clamped by a screw rather than a spring, with silicone rubber where the headband rests — the cheapest holder here, and the only clamp-on one with no thickness range.
Best for: A desk you have already measured, where the simplest and cheapest sound mounting is enough.
A solid North American walnut base and cradle on aluminum alloy support rods, hand-polished and wood-wax finished, arriving fully assembled — the most expensive stand in this hub.
Best for: A desk where materials and finish matter as much as function, and paying more for walnut is the point.
A clamp-on holder that flips over to work either as an under-desk hanger or an above-desk stand, adjustable between 6.5 and 10.2 in, taking desks up to 1.97 in — and the one listing in this hub that publishes a weight limit.
Best for: Anyone who does not yet know whether they want the headset above the desk or under it.
A vented metal riser with three leg heights and a stated 44 lb capacity — on its published figures the same stand as the GRIFEMA riser in this hub, at about $10 against $53.
Best for: Raising a monitor by a measured amount, cheaply, with a keyboard parked underneath.
A desktop-less electric frame adjusting between 28.3 and 46.5 in with four memory presets, sized for tops from 39.4 to 63.3 in and rated to 176 lb — with no manual override published.
Best for: Keeping a desktop you already own and replacing the frame underneath it.
A three-piece 24 V lift motor kit sold in two hexagon-hole sizes, with a hand controller carrying presets and a sedentary reminder — and no brand, no force rating and no stroke published.
Best for: A frame whose hexagon drive shaft you have already measured, where the original part is no longer sold.