Published height and base width — and a note about the desk
A freestanding aluminum and TPU stand that publishes both its height and its base width — 8.85 in on 3.7 in square — and asks, in its own listing, for a desk that is flat and dust free.
New Bee aluminum and TPU desktop headset stand
Best for: A desk where a stand has to be moved around rather than fixed to one edge, and where the surface is flat.
This hub opens on the geometry of tipping: a light stand with a heavy headset hung off one side has leverage working against it, and the arch shape does not fix that. New Bee is the listing here that lets you check the geometry yourself, because it publishes both numbers — “about 8.85 inches height, 3.7 inches length, 3.7 inches width”, about 22.5 cm on a 9.4 cm square.
What it does not publish is a weight for the stand, which is the other half of the same question. And inside the bullet that claims aluminum and TPU rubber “provide a safe and stable foundation”, the same listing adds: “Note: when you place the headset holder on the desk please be sure the desk is flat and dust free.” Both sentences are the maker’s; they are quoted here in the order the page prints them.
Against that, the compatibility list is unusually concrete for this shelf — Sennheiser HD 650, Sony MDR-7506, AKG K612, HyperX Cloud II, Astro A50 — and being freestanding, it has no clamp range to match against your desk, which is the thing that disqualifies a hook before anything else does. At about $9 it is the cheapest freestanding stand sold in the US here, against $16 for the Lamicall and $30 for the Muso walnut stand.
Read on the day this page was built: $9 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Best for: A desk where a stand has to be moved around rather than fixed to one edge, and where the surface is flat.
Prices quoted in this text were read on 2026-10-13. The live price is at the top of the page.
New Bee does not explain it. The note sits inside the sturdiness bullet — "Note: when you place the headset holder on the desk please be sure the desk is flat and dust free" — immediately after the claim that aluminum and TPU "provide a safe and stable foundation". On a stand whose base is a 3.7 in square under an 8.85 in arm, the condition of the surface is doing part of the work the base is credited with.
The listing names Sennheiser 202 II, HD 598, HD 650 and HD 700, Beats Solo, Koss Porta Pro, Sony MDR-7506, Philips, AKG K612, HyperX Cloud II, Astro A50, Audio-Technica M50 and Turtle Beach 420x. It is a list of examples rather than a limit — the hook takes a headband, and these are the headbands the maker chose to name.
The listing says the stand is "made of aluminum headset stand and TPU rubber" without saying where the rubber sits. Ask the seller if it matters for a delicate headband.
A rotating spring-clamp hanger whose listing matches the Celerion hook point for point, and which reaches further down the thickness range — 0.31 in, about 8 mm, at the thin end.
Best for: A thin desktop or a glass top, where 8 mm (0.31 in) is the figure that decides it.
A spring-clamp hook that rotates 360 degrees so the headset can be turned out of the way under the desk, with a cable rack on the side and a stated clamp range of 0.47 to 1.57 in.
Best for: A desk of ordinary thickness where the headset should disappear under the edge between sessions.
A slim 24 cm headset stand with a soft TPU pad on top and a non-slip base, assembling from 3 parts in 30 seconds — sold in Europe, with no offer on Amazon.com.
Best for: A minimal-footprint way to keep a headset off the desk, for a buyer shopping on a European Amazon store.
Two screw-fixed metal trays, each 14.5 by 5 by 3.4 in, stated to hold up to 15 lb — the highest published capacity in this hub — screwed on, like the VIVO, so they do not rely on clamp pressure.
Best for: A standing desk you are willing to drill, where the mount must not move for years.
A clamp-on welded metal tray that fits desktops from 0.4 to 2.4 in with no drilling, rated to 10 lb, and can be mounted with its opening facing in or out.
Best for: A standing desk or a glass top, where nothing should be drilled and the tray may need to move.
The largest tray surface in this hub at 13.38 by 7 in, ventilated and open-grid, mounted by adjustable no-drill brackets — and the only American tray here that publishes no weight figure.
Best for: A desk with a power strip and several bulky adapters that need air around them.