The longest arm in this hub, and no load figure at all
The longest arm on this shelf at 36.6 in, on an aluminum-magnesium alloy core with a thickened ABS clamp — and no maximum load published anywhere.
Voinap clamp-on gooseneck arm, 36.6 inch
Best for: An overhead or over-the-monitor shot that no shorter arm on this shelf can reach.
This is the longest arm on the shelf by a wide margin — 36.6 in, 93 cm, against 30 in for the next gooseneck — and length is the whole reason to buy it. A short arm puts a webcam beside the monitor; an arm this long curves over the top of a 27 in screen and comes back down at your face, or reaches out over a desk for an overhead shot of your hands.
The construction is better described than most: an aluminum-magnesium alloy core, stated to be rigid enough to hold a device steadily while staying bendable, in a thickened ABS clamp with silicone padding that closes on surfaces up to 2.56 in — bed frames and headboards included, which is a genuine use for an arm this long.
What is missing is the load. On a gooseneck, droop grows with weight and very fast with length, which makes a maximum load more important at 36.6 in than at 21 — and this listing publishes none. The listing also recommends shaping the arm into an S or Z for stability, which is sound advice and spends a good part of the length you paid for. Read the 36.6 in as tube rather than reach.
Read on the day this page was built: $24 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Best for: An overhead or over-the-monitor shot that no shorter arm on this shelf can reach.
Prices quoted in this text were read on 2026-10-13. The live price is at the top of the page.
Not in the way the number suggests, and the listing half says so. It recommends shaping the arm "into S or Z curves for enhanced stability", which is the same advice the 30 in gooseneck on this shelf gives — and bending the arm is exactly what spends its length. The 36.6 in figure is the length of the tube, not the reach you will use. What the extra length buys is the ability to curve over a monitor and still arrive where you need the camera.
The listing does not say, which on the longest arm here is the gap that matters most. A gooseneck droops more with weight and much more with length, so the figure matters more at 36.6 in than at 21. Three stands on this shelf publish between 1.0 and 1.76 lb, including the 30 in JCWINY gooseneck at 1.5 lb; this one publishes nothing, while naming ring lights among the devices it takes. Test anything heavier than a webcam before trusting it.
A budget plug-and-play 1080P webcam with a 6-layer glass lens, automatic exposure correction, and a digital microphone with automatic noise reduction.
Best for: A no-fuss, budget webcam for general video calls without needing driver installation.
The HP 430: a 1080p webcam with autofocus, an 85° field of view, two noise-reducing microphones, 360° pan and 15° tilt, and a built-in privacy shutter.
Best for: Frequent video calls where image sharpness, dual-mic clarity and a physical privacy shutter all matter.
An overhead boom on a 3.62 lb metal base — the only stand in this hub to publish its own mass, which is the figure its whole stability argument rests on.
Best for: Overhead filming of hands, a keyboard or a work surface, where the base has to outweigh the arm.
One of the two thinnest mats in this hub at 13 mm (0.51 in), in PVC foam with a diamond-textured underside and a bevelled edge, sold primarily as a kitchen rug.
Best for: A short standing session on a hard floor, or the kitchen, where thickness is not the point.
The largest mat in this hub at 92 × 152 cm (36 × 60 in): a commercial-grade antistatic PVC surface over a high-density memory foam core, designed to hold its shape rather than flatten.
Best for: Genuinely long standing sessions where mat rebound and long-term shape retention matter more than price.
A single 54 by 36 in mat split into a thin zone for chair casters and a cushioned zone for standing, with the maker stating which part the wheels must stay off.
Best for: A sit-stand desk on a hardwood floor, where two separate mats would be in each other’s way.