Names the two Logitech webcams it will NOT fit
A 25 in gooseneck with a published 1.0 lb limit and a compatibility list that names its exclusions — the Logitech C270 and C310, which have no tripod thread.
InnoGear clamp-on gooseneck arm, 25 inch
Best for: A webcam on a thin desktop, where the arm has to be short enough to stay still.
Two numbers and one exclusion make this listing useful. The arm is 25 in including the ball head, the maximum load is 1.0 lb, and the clamp opens to 1.8 in — which is enough for an ordinary desktop and not enough for a thick one.
The exclusion is the part worth paying attention to. InnoGear lists the Logitech webcams it fits and then names two it does not: the C270 and the C310. Those two mount on a folding plastic foot with no tripod socket, so no amount of thread compatibility helps. The other stands on this shelf describe compatibility by the 1/4 in thread alone and leave you to discover which devices do not have one.
The rest is conventional and complete: a 360-degree ball head on a knob, a 1/4 in thread, an anti-scratch sponge pad on the clamp, and a spring-loaded phone holder extending to 4 in. At 1.0 lb the limit is the lowest published on this shelf — fine for a webcam, and the figure to check before putting a large phone in a heavy case or a ring light on the same arm.
Read on the day this page was built: $20 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Best for: A webcam on a thin desktop, where the arm has to be short enough to stay still.
Prices quoted in this text were read on 2026-10-13. The live price is at the top of the page.
Because some do not have one. InnoGear names the exception — "expect for Logitech Webcam C270 C310" — and those two models mount with a folding plastic foot rather than a tripod socket, so there is nothing to screw a stand into. It is the only listing on this shelf to publish an exclusion, and it is the kind that otherwise costs a return.
For a typical 18 to 25 mm (0.71 to 0.98 in) desktop, comfortably. For a thick butcher-block or a desk with a bullnose edge, no — 1.8 in (4.6 cm) is the narrowest clamp in this hub, where the stands around it open to 2.56 and 2.7 in. The clamp opening is one of the four figures a stand purchase turns on, and this is the one where this stand is most restricted.
A telescopic aluminum pole on a weighted metal base with the highest published load capacity on this shelf, 1.76 lb — and a pole that detaches to be used in the hand.
Best for: A webcam that has to reach the middle of a large monitor from a desk with no free edge.
A 30 in gooseneck on an upgraded clamp base, with a published 1.5 lb limit and a listing unusually willing to say where the thing fails.
Best for: A webcam that needs to come over the top of a monitor, on a desk that does not wobble.
A weighted-base telescopic stand with a swivel ball head and a phone holder, positioned against flimsy plastic alternatives — and publishing no height, load or base weight.
Best for: A glass desk or a desk with no free edge, where a clamp is not an option.
The smaller of the two contoured Topo mats, with a sculpted terrain surface meant to be explored by the feet — and a listing whose nine bullets are the full-size mat’s word for word.
Best for: A standing desk with little floor in front of it, where a contoured surface is wanted anyway.
The full-size contoured Topo, built to be stood on unevenly rather than cushioned, sold with a seven-year warranty — and without a thickness, a density or a dimension anywhere on the listing.
Best for: Standing for hours at a desk, where a surface that makes you move is preferred to one that lets you stand still.
A 9/10 in memory foam mat with a PU leather top stated to resist punctures and tears, bevelled low-angle edges, and packaging the maker specifically does not fold.
Best for: A desk where the mat is a fixture, and arriving flat matters as much as the foam.