The only published load figure in this hub — 5 kg (11 lb)
A clamp-on holder that flips over to work either as an under-desk hanger or an above-desk stand, adjustable between 6.5 and 10.2 in, taking desks up to 1.97 in — and the one listing in this hub that publishes a weight limit.
NEETTO two-in-one headset hanger and stand
Best for: Anyone who does not yet know whether they want the headset above the desk or under it.
Every listing on this shelf describes what it will hold. This is the only one that puts a number on it: the HS906 “can also be used to store other items within 5kg such as cables, wires, bags etc.” For a headset that figure is not the binding constraint, but it is the difference between a published specification and an adjective, and this hub compares the former.
The other half of the design is that it does not choose. Flipped one way it is an under-desk hanger; flipped the other it is a stand that sits above the desk, with a raised ledge around the mount so the headset is not knocked off it. The height adjusts between 6.5 and 10.2 in to suit whichever you settle on, and the mount rotates 360° so the headset can be tucked under the desk and swung to the front when needed.
On fit, NEETTO publishes the thickest clamp in this hub — up to 1.97 in, 50 mm, with soft silicone pads and tool-free installation — and no minimum at all. That is the reverse of the JAKO hook, which publishes neither end, and of the Celerion and EURPMASK hooks, which publish both. A thick butcher-block or laminated desktop is the case this one is built for. At about $15 it costs more than the fixed hooks, $7 to $12, for the two positions and the published load.
Read on the day this page was built: $15 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Best for: Anyone who does not yet know whether they want the headset above the desk or under it.
Prices quoted in this text were read on 2026-10-13. The live price is at the top of the page.
NEETTO states the holder "can also be used to store other items within 5kg such as cables, wires, bags etc." It is the only number of its kind on this shelf: every other listing describes its load in words — "a varied weight of headphones", "headphones of all sizes" — without publishing a figure. For a headset alone it is not the constraint; it is simply the one listing that tells you.
That is the question the product exists to postpone. Short and inverted, it hangs the headset under the desk edge and out of the eye line; extended and upright, it holds the headset above the desk where it is visible and quicker to reach. The 360° mount lets it swing out to the front in either position.
NEETTO gives only the upper limit, 1.97 in (50 mm). For a thin top, the EURPMASK publishes 0.31 in at the low end and the Celerion 0.47 in.
The one holder in this hub that clamps to the side of a monitor instead of a desk, with a silicone-coated cradle and a stated panel range of 0.2 to 0.7 in.
Best for: A desk with no spare edge and no spare surface, where the monitor is the only thing left to hang from.
A freestanding aluminum and TPU stand that publishes both its height and its base width — 8.85 in on 3.7 in square — and asks, in its own listing, for a desk that is flat and dust free.
Best for: A desk where a stand has to be moved around rather than fixed to one edge, and where the surface is flat.
A rotating spring-clamp hanger whose listing matches the Celerion hook point for point, and which reaches further down the thickness range — 0.31 in, about 8 mm, at the thin end.
Best for: A thin desktop or a glass top, where 8 mm (0.31 in) is the figure that decides it.
A 24 V, 60 W linear actuator sold as a recliner motor, rated to 6000 N with a 230 mm (9 in) stroke at 5 mm/s, limit switches and IP44 — a general-purpose part, not one made for a desk.
Best for: A qualified installer investigating a replacement motor when the original manufacturer part is unavailable.
A white hand-crank desk frame, 71 to 113 cm (28 to 44.5 in) tall and 102 to 160 cm (40.2 to 63 in) wide, rated 70 kg static and 50 kg dynamic — with no motor to fail, sold only in Europe.
Best for: A motor-free sit-stand desk built on a top you already own, for a buyer shopping on a European Amazon store.
Two screw-fixed metal trays, each 14.5 by 5 by 3.4 in, stated to hold up to 15 lb — the highest published capacity in this hub — screwed on, like the VIVO, so they do not rely on clamp pressure.
Best for: A standing desk you are willing to drill, where the mount must not move for years.