Skip to content

JCWINY clamp-on gooseneck arm, 30 inch

A 30 in gooseneck on an upgraded clamp base, with a published 1.5 lb limit and a listing unusually willing to say where the thing fails.

JCWINY black gooseneck webcam stand clamped to a desk with a webcam on top

JCWINY clamp-on gooseneck arm, 30 inch

  • Publishes a maximum load — 1.5 lb, 0.7 kg — and warns it is not for a heavy camera
  • Publishes the clamp opening at 2.7 in, with a non-slip cushion
  • Warns that the clamp "may crack" if over-tightened

Best for: A webcam that needs to come over the top of a monitor, on a desk that does not wobble.

≈ $19
Check price on Amazon

Specifications

Amazon reference
B08MVTX8LV
EAN
0762409116668
Type
Clamp-on gooseneck arm
Manufacturer reference
762409116668
Base
Clamp, opens to 2.7 in (7 cm)
Reach or height
30 in (76 cm)
Max load
1.5 lb (0.7 kg)
Thread
1/4 in
Head
360° ball joint

Of the eight stands in this hub, this is the one whose listing reads as though someone had used it. It publishes the figure that matters — a maximum load of 1.5 lb, with “Not for heavy Camera and devices” attached — and then explains the three things that go wrong with a long gooseneck.

First, geometry: the arm is steadier bent into an S or a Z than extended straight, because that brings the weight back toward the clamp. Second, the clamp: it should be tightened firmly and no further, because “If over-tightened, it may crack”. Third, the desk: it must be steady with no wobble, which the listing calls very important — a 30 in arm multiplies whatever the desk does underneath it.

The specification around those warnings is complete enough to check. Thirty inches of reach, a clamp opening to 2.7 in with a non-slip cushion, a 360-degree ball joint, a 1/4 in thread, and a list of the Logitech and GoPro models it has been matched to. The 1.5 lb limit sits oddly beside the compatibility list, which names DSLRs and projectors along with webcams and GoPros — the figure, not the list, is the one to go by.

Availability

Read on the day this page was built: $19 at the American Amazon shop.

Read from Keepa on the day this page was last revised; stock and price both move without notice.

What holds up, and what does not

Best for: A webcam that needs to come over the top of a monitor, on a desk that does not wobble.

Strengths

  • Publishes a maximum load — 1.5 lb, 0.7 kg — and warns it is not for a heavy camera
  • Publishes the clamp opening at 2.7 in, with a non-slip cushion
  • Reaches 30 in, the second longest arm in this hub
  • 360-degree ball joint and a 1/4 in thread; names the Logitech and GoPro models it fits
  • Tells you the arm is steadier bent into an S or Z shape rather than extended straight

Compromises

  • Warns that the clamp "may crack" if over-tightened
  • Asks you to hold the clamp with one hand while moving the arm, every time
  • States that the desk must be steady with no wobble — a gooseneck amplifies whatever the desk does
  • Lists DSLRs and projectors as compatible, beside a 1.5 lb limit that most of them would exceed

Prices quoted in this text were read on 2026-10-13. The live price is at the top of the page.

What buyers ask us first

Why does the listing say to bend it into an S or Z?

Because a gooseneck is a cantilever and a straight one is the worst case. Bent back on itself, the load sits closer to the clamp and the moment arm shortens, so the arm droops less and the clamp twists less. JCWINY says it plainly — "The webcam will be more stable if you bend the tube as “S” or “Z” to clamp on the desk" — and it is the single most useful sentence on this shelf about how these stands actually behave.

How careful do I have to be with the clamp?

More careful than most listings admit. This one states that the base "is easy to be secured in place without the need to go overboard. If over-tightened, it may crack", and asks you to steady the clamp by hand whenever the arm is moved. Those are real instructions about a clamp carrying a 30 in lever, and no other page on this shelf gives them.

All webcams & mounts