The cheapest set here, with its load given per wheel
Pztayoe rubber-wheel casters with an 11 mm (0.43 in) stem, set of five
Five 2 in rubber casters on standard 11 mm (0.43 in) stems, and the only caster set in this hub to publish its load per wheel rather than a total — the Topdeep base kit is the only other part to give one.
Pztayoe rubber-wheel casters with an 11 mm (0.43 in) stem, set of five
Publishes a load per wheel — 300 lb — which is the figure this hub compares; among the caster sets, the only one given that way
States the total as well, 1,500 lb for five, so the arithmetic is visible
Explicitly not recommended for thick or high-pile carpet
Best for: A chair on a hard floor or low-pile carpet, where the stem has already been measured.
2 in (51 mm), rubber in the bullets ("PU" in the manufacturer reference), ball bearings
Floors
Hardwood, tile, laminate, vinyl, low-pile carpet; not thick carpet
Stated load
300 lb (136 kg) per wheel, 1,500 lb (680 kg) for five
Not compatible with
IKEA chairs
Of everything on this shelf, this set does the one thing the shelf asks for: it publishes a load per wheel. Three hundred pounds each, fifteen hundred for five, stated in the same bullet so the arithmetic is on the page. Every other caster set in this hub publishes a single big total and leaves you to guess which it means; only the Topdeep base kit, a different kind of part, also gives a per-caster figure.
The rest is what a cheap set of replacement casters should be: 2 in rubber wheels rather than hard plastic, precision ball bearings, 360-degree rotation, tool-free fitting, and an honest limit — “Not recommended for thick/high-pile carpet”. The hub’s own introduction is that carpet and hard-floor casters are not interchangeable, and this listing picks its side and says so.
Two things to check before ordering. The listing gives the stem as 11 mm (0.43 in) and never gives its length, where this shelf’s buying tip asks for both; 11 × 22 mm (0.43 × 0.87 in) is the usual pairing and the sets alongside it publish it as 7/16 by 7/8 in. And the manufacturer reference on the page is written partly in Chinese characters — it translates as “2-inch PU leather wheel”, where the bullets say rubber — which is a reminder that the Amazon reference below is the identifier to order against.
Availability
Read on the day this page was built: $8 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
What holds up, and what does not
Best for: A chair on a hard floor or low-pile carpet, where the stem has already been measured.
Strengths
Publishes a load per wheel — 300 lb — which is the figure this hub compares; among the caster sets, the only one given that way
States the total as well, 1,500 lb for five, so the arithmetic is visible
High-elasticity rubber wheels rather than hard plastic, for hardwood, tile, laminate and vinyl
Tool-free installation, and the listing asks you to check the 11 mm (0.43 in) stem first
The lowest price in this hub
Compromises
Explicitly not recommended for thick or high-pile carpet
Not compatible with IKEA chairs, which the listing states
The manufacturer reference is partly in Chinese and reads "2-inch PU leather wheel", where the bullets say rubber
No stem length published, only the 11 mm (0.43 in) diameter — and this hub’s buying tip asks for both
Prices quoted in this text were read on 2026-10-13. The live price is at the top of the page.
What buyers ask us first
Is 300 lb per wheel a meaningful figure?
It is at least a stated one, given the right way round. This hub compares rated load per wheel across a five-wheel base, and every other caster set on this shelf publishes a single large total instead (only the Topdeep base kit also gives a per-caster figure, 110 lb) — 650, 700, 1,000, 2,000 lb — without saying whether that is per caster or for the set. Pztayoe gives both: 300 lb each, 1,500 lb for five. Whether any of these numbers was measured is a separate question that no listing here answers.
What is missing before I can order?
The stem length. The listing gives 11 mm (0.43 in), which is the diameter, and this hub’s buying tip asks for the diameter and the length, plus whether the stem is a grip ring or threaded. The usual pairing with 11 mm (0.43 in) is 22 mm (0.87 in) long, which the other sets on this shelf publish as 7/16 by 7/8 in — worth confirming against the caster you pull out.
Transparent dual-wheel polyurethane casters with a published noise figure of 28 decibels and a 700 lb rating — the second most modest load claim among the caster sets here, after the Lifelong's 650 lb.
Amazon reference
B0GS5FNTZH
EAN
0702367348978
Manufacturer reference
OCW-004-Black
In the box
5 casters
Stem
7/16 × 7/8 in (11 × 22 mm)
Wheel
2 in (51 mm) transparent dual wheel, polyurethane, ball bearings
Floors
Hardwood and carpet, including thick carpet
Stated load
700 lb (317.5 kg) for the set
Noise
28 dB, no method given
Not compatible with
IKEA chairs
Publishes a noise figure — 28 dB — which no other caster in this hub does
A 700 lb claim with the metric equivalent given, 317.5 kg — modest beside the 1,000 to 2,500 lb figures elsewhere on this shelf
The HEAVY DUTY bullet is printed twice, word for word, on the listing
Best for: A shared office or a quiet room, on a chair named in the listing.
Polyurethane rollerblade casters on industrial carbon steel frames with double-layer bearings — carrying a 2,000 lb claim that the same brand’s other set on this shelf puts at 700.
Amazon reference
B0F9NKJZB9
EAN
0702367348961
Manufacturer reference
OCW-003-Black
In the box
5 casters
Stem
7/16 × 7/8 in (11 × 22 mm)
Wheel
2 in (51 mm) ball-style polyurethane ("rubber" in the title), carbon steel frame, double-layer bearings
Floors
Hardwood, carpet, tile, laminate, vinyl, concrete
Stated load
2,000 lb (907 kg) for the set, no method given
Not compatible with
IKEA chairs
Carbon steel frames stated to be wider and thicker than standard, with double-layer precision bearings
Polyurethane wheels stated safe for hardwood, carpet, tile, laminate, vinyl and concrete
A 2,000 lb claim against 700 lb on the same brand’s other set here, with nothing on either page to explain it
Best for: A heavy chair on mixed flooring, where the frame matters more than the headline number.
The plate that bolts under a chair seat and carries the tilt, swivel and height controls, published with the two dimensions that decide whether it fits — the cylinder hole and the bolt pattern.
Amazon reference
B08CMJQS3J
EAN
0680306842407
Type
Under-seat tilt and height control mechanism
Bolt pattern
10.2 × 6 in (26 × 15 cm) in the title; "6 - 10 in" in a bullet
Cylinder hole
1.57 in (40 mm)
Material
Steel bracket, 0.1 in (2.5 mm)
Stated load
Not published
Tilt range
Not published
Publishes the bolt pattern, 10.2 by 6 in, which is the measurement that decides fit on a mechanism
Publishes the gas cylinder hole diameter, 1.57 in, separately from the bolt pattern
The bullets give the bolt pattern twice and disagree — "10.2"×6"" in the title, "6" - 10" bolt pattern" in the size bullet
Best for: A chair whose seat and base are sound but whose height lever or tilt has stopped working.
A standing desk converter offering 12 distinct height levels from 13 to 52cm (5.1 to 20.5 in), an 80×40cm (31.5 × 15.7 in) surface, a separate 65×30cm (25.6 × 11.8 in) keyboard tray, and a 2-year warranty.
Amazon reference
B07ZR5FZQ2 (identical on 6 markets)
EAN
0608603058321
Manufacturer reference
DC01
Height
13–52 cm (5.1–20.5 in), 12 levels
Top surface
80 × 40 cm (31.5 × 15.7 in)
Keyboard tray
65 × 30 cm (25.6 × 11.8 in)
Load
15 kg (33 lb) top; 2 kg (4.4 lb) tray
Lift
Gas spring, handle release
Warranty
2 years
12 height levels, 13 to 52 cm (5.1 to 20.5 in) — the most stated in this hub, one more than the Vari's eleven
Wide 80×40cm (31.5 × 15.7 in) work surface plus a separate 65×30cm (25.6 × 11.8 in) keyboard tray
About €96 on amazon.de, against about €63 for the VonHaus; not listed on Amazon.com
Best for: Anyone who wants to fine-tune a precise standing height rather than settle for a handful of fixed positions.