Skip to content

Yecaye open-sided J-channel raceway, six lengths

Six J-shaped adhesive raceways with the opening facing outward so cables drop in rather than thread through, in PVC the maker states will char rather than ignite.

Yecaye black J-channel cable raceway stuck under a desk with cables dropped into it

Yecaye open-sided J-channel raceway, six lengths

  • Publishes all three dimensions for each channel — 15.7 by 0.99 by 1.55 in — and the pack length comes to nearly eight feet
  • The opening faces outward, so a cable is dropped in rather than threaded from one end
  • Capacity is published as "theoretically accommodate up to 10 cables", which is a qualified figure

Best for: A desk edge or wall run where cables are added and removed often, and should not be visible.

≈ $17
Check price on Amazon

Specifications

Amazon reference
B07Q8QN5CB
EAN
0711766624804
Pieces
6 channels, 94 in (2.4 m) in total
Channel size
15.7 × 0.99 × 1.55 in (40 × 2.5 × 3.9 cm)
Material
Flame-retardant PVC (no standard cited)
Capacity
Up to 10 cables each, "theoretically"
Adhesive
Pre-applied; 24 hours to full bond; released with warm air

A J-channel is a trough with one side cut away, and the cut side is the whole point: cables drop in from the front instead of being threaded from one end, which means the run can be changed in ten seconds instead of being rebuilt. Six of them here, each 15.7 in long by 0.99 wide and 1.55 deep, which is nearly eight feet of channel.

Two things on the listing are better than the category average. The PVC is stated to be flame retardant — it “will not ignite flames… will only show discoloration from charring”, which is the maker’s description rather than a cited standard. And the adhesive is described in both directions: 24 hours to reach full bond going on, and warm air to release it cleanly coming off.

The capacity figure is hedged in a way worth repeating exactly: each channel can “theoretically accommodate up to 10 cables”. Ten thin cables in a 0.99 by 1.55 in trough is tight, and the word is the maker’s. One oddity about the page itself: the manufacturer reference reads “iphone11/xr-gre2-HS-01”, a part number from a phone case, which is a reminder to order against the Amazon reference below rather than the seller’s own string.

Availability

Read on the day this page was built: $17 at the American Amazon shop.

Read from Keepa on the day this page was last revised; stock and price both move without notice.

What holds up, and what does not

Best for: A desk edge or wall run where cables are added and removed often, and should not be visible.

Strengths

  • Publishes all three dimensions for each channel — 15.7 by 0.99 by 1.55 in — and the pack length comes to nearly eight feet
  • The opening faces outward, so a cable is dropped in rather than threaded from one end
  • Flame-retardant PVC, which the maker states will discolour and char rather than ignite
  • Pre-applied adhesive, and removable with warm air without residue or tools
  • States a 24-hour bonding time before the joint is at full strength

Compromises

  • Capacity is published as "theoretically accommodate up to 10 cables", which is a qualified figure
  • Adhesive is specified for smooth surfaces, and the listing itself warns that powdery walls or uneven surfaces may stop it sticking
  • The manufacturer reference on the listing reads "iphone11/xr-gre2-HS-01", which belongs to a phone case
  • An open-sided channel hides cables from the front and not from below

Prices quoted in this text were read on 2026-10-12. The live price is at the top of the page.

What buyers ask us first

What does flame-retardant mean on a cable channel?

Yecaye states it as behavior rather than a standard: the PVC "will not ignite flames; The desk wire management will only show discoloration from charring". No rating is cited — no UL 94 class, no test — so it is a manufacturer description. It is still the kind of property worth having on a plastic trough full of mains cable, and the only other fire-related claim in this hub is the UL recognition on the sleeving.

How do I get it off again?

With heat. The listing says that "With a little heat... you can easily remove the cable raceway without tools, leaving no residue", and on the way in it asks for 24 hours to reach full bond. Both instructions are about the adhesive rather than the plastic, which is the part of a stick-on channel that decides whether it was a good idea.

All cable management