Skip to content

The only cover here that publishes the backrest THICKNESS

DIVA EN CAMINO water-resistant spandex chair cover with a zip

The only cover in this hub that states how thick a backrest it will go over — 5.1 to 6.6 in — alongside a water-resistant finish and a size table that is almost the whole listing.

DIVA EN CAMINO black water-resistant cover stretched over a padded office chair

DIVA EN CAMINO water-resistant spandex chair cover with a zip

  • Publishes a backrest thickness range, 5.1 to 6.6 in — the dimension that decides whether a padded back will go in, and the one every other cover here omits
  • Sold as water resistant as well as washable, which is the difference on a spill
  • The published specification is essentially the size table — there is one bullet on the listing

Best for: A thickly padded chair, or a household with pets, where the cover has to go over real bulk and shrug off a spill.

≈ $10
Check price on Amazon

Specifications

Amazon reference
B08R6W74QL
EAN
0780682542523
Manufacturer reference
DEC-CC01-BLACK-L
Coverage
Back and seat, closed by a zip
Back height
27.5–31.4 in (70–80 cm)
Back width
17.7–22.8 in (45–58 cm)
Back thickness
5.1–6.6 in (13–17 cm)
Seat
17.7–22.8 in long, 17.7–23.6 in wide (45–58 × 45–60 cm)
Material
Spandex; percentages not published
In the box
1 cover, size L; no armrest covers

This listing publishes almost nothing and one thing nobody else does. The bullet list is a single entry — a size table — and inside it, between the backrest height and the seat length, sits a figure that appears on no other cover in this hub: back thickness, 5.1 to 6.6 in.

That is the measurement that decides the purchase on a padded chair. Height and width say how far the fabric has to travel; thickness says how much chair there is to travel round. A cover cut for a 3 in slab of mesh will not close over a 6 in foam executive back of the same height and width, and no amount of spandex fixes it. Every other listing on this shelf leaves it to be guessed; this one states the window.

The rest is thin in both senses. “Water Resistant” leads the product name and is supported nowhere — no coating, no rating, no statement about whether it survives a wash. The fabric is given as “Spandex” without percentages, where the covers alongside it state 92/8, 90/10 and 85/15. The title calls the cover removable and washable, and it is sold with pets in mind. Against that, it is the one page here that answers the question a thickly upholstered chair actually poses.

Availability

Read on the day this page was built: $10 at the American Amazon shop.

Read from Keepa on the day this page was last revised; stock and price both move without notice.

What holds up, and what does not

Best for: A thickly padded chair, or a household with pets, where the cover has to go over real bulk and shrug off a spill.

Strengths

  • Publishes a backrest thickness range, 5.1 to 6.6 in — the dimension that decides whether a padded back will go in, and the one every other cover here omits
  • Sold as water resistant as well as washable, which is the difference on a spill
  • Five dimensions published with ranges, including both seat measurements
  • A durable zip, with coverage extending over the whole chair
  • Marketed for homes with dogs and cats, with a removable, washable cover

Compromises

  • The published specification is essentially the size table — there is one bullet on the listing
  • No fiber percentages given, only "Spandex"
  • No armrest covers included
  • Nothing published about the water-resistant finish — no coating named, no wash-cycle durability

Prices quoted in this text were read on 2026-10-13. The live price is at the top of the page.

What buyers ask us first

Why is backrest thickness the figure that matters?

Because height and width tell you how far the cover has to reach, and thickness tells you how much there is to go round. A 22 in wide backrest that is 3 in thick and a 22 in wide backrest that is 6 in thick need very different amounts of fabric, and a stretch cover sized for the first will not close over the second. This listing is the only one in this hub to publish the range — 5.1 to 6.6 in (13 to 17 cm) — and on a padded executive chair it is the measurement to take.

How water resistant is it?

The listing does not say. "Water Resistant" appears in the product name and nowhere in the specification, which is a single bullet giving the five fit dimensions. No coating is named, no rating is given, and nothing is published about whether the resistance survives washing. What its title does state is that the cover is removable and washable, which on a spill is the fallback either way.

More chair covers

  • GOWT black velvet plush chair cover with matching armrest covers fitted to an office chair

    GOWT velvet plush cover set with armrest covers

    A velvet plush set with the highest spandex content on this shelf at 15 per cent, reinforced zips, and the only matching armrest covers in this hub.

    Amazon reference
    B0BCGZD5PV
    EAN
    6011436109094
    Manufacturer reference
    1436102675--64515955
    Coverage
    Back and seat, plus a pair of armrest covers
    Back
    17.7–22.9 in wide, 27.5–31.5 in high (45–58 × 70–80 cm)
    Seat
    17.7–23.7 in wide, 17.7–22.9 in long (45–60 × 45–58 cm)
    Material
    85% polyester, 15% spandex, velvet plush
    Fixing
    Elastic edges and reinforced zips
    Care
    Machine wash cold, gentle, non-bleach; air dry; no ironing
    • Includes a matching pair of armrest covers — the only listing in this hub that covers the arms
    • 15 per cent spandex, the highest stated proportion on this shelf, in an 85 per cent polyester velvet plush
    • More than twice the price of every other cover among the US listings in this hub

    Best for: A chair where the armrests are as worn as the seat, and a plush finish is wanted over plain stretch fabric.

    ≈ $23
    Check price on Amazon
  • Melaluxe black stretch cover fitted over a full office chair

    Melaluxe full-chair stretch cover with elastic bands and zips

    A full-chair stretch cover with elastic bands and zips, publishing its backrest and seat windows in centimeters as well as inches — and the tightest upper backrest limit in this hub.

    Amazon reference
    B086BYZ869
    EAN
    8414831265323
    Coverage
    Back and seat; no armrest covers
    Back
    70–78 cm high, 50–60 cm wide (27.6–30.7 × 19.7–23.6 in)
    Seat
    45–55 cm long, 50–60 cm wide (17.7–21.7 × 19.7–23.6 in)
    Material
    92% polyester, 8% spandex
    Fixing
    Elastic bands and zips
    Care
    Machine washable
    In the box
    1 cover, size L
    • Covers the backrest and the seat rather than the seat alone
    • Publishes four dimensions with ranges, in centimeters and inches both — the only full cover here with metric sizes
    • A 70 to 78 cm (27.6 to 30.7 in) backrest window is the lowest ceiling among the full covers in this hub, where the others reach 31.4 and 31.5 in

    Best for: A standard task chair whose backrest is under 78 cm (30.7 in) tall, where the whole chair needs covering rather than the seat.

    ≈ $10
    Check price on Amazon
  • Mirenko black elastic office chair seat cover

    Mirenko elastic polyester chair seat cover

    An elastic polyester seat cover with a stated fit range of 48 to 52cm (18.9 to 20.5 in) wide and 45 to 50cm (17.7 to 19.7 in) deep, for a quick refresh on office and computer chairs.

    Amazon reference
    B0H6DVCG5H (identical on 5 markets)
    EAN
    0745248676036
    Manufacturer reference
    dfsag11
    Coverage
    Seat only
    Fits seats
    48–52 cm (18.9–20.5 in) wide, 45–50 cm (17.7–19.7 in) deep
    Material
    Elastic polyester; percentages not published
    Color
    Black
    Care
    Not published
    • Its "universal fit" comes with numbers: seats 48–52 cm (18.9–20.5 in) wide and 45–50 cm (17.7–19.7 in) deep
    • Elastic material allows quick, tool-free fitting
    • Seat-only coverage, like the other seat covers in this hub

    Best for: A chair that falls within the 48–52cm (18.9 to 20.5 in) width range, where a precisely stated fit matters more than a vague universal claim.

    Search Amazon for this model

Elsewhere in the spares drawer

  • ERGOMAKER standing desk converter with keyboard tray

    ERGOMAKER 12-level height-adjustable standing desk converter

    A standing desk converter offering 12 distinct height levels from 13 to 52cm (5.1 to 20.5 in), an 80×40cm (31.5 × 15.7 in) surface, a separate 65×30cm (25.6 × 11.8 in) keyboard tray, and a 2-year warranty.

    Amazon reference
    B07ZR5FZQ2 (identical on 6 markets)
    EAN
    0608603058321
    Manufacturer reference
    DC01
    Height
    13–52 cm (5.1–20.5 in), 12 levels
    Top surface
    80 × 40 cm (31.5 × 15.7 in)
    Keyboard tray
    65 × 30 cm (25.6 × 11.8 in)
    Load
    15 kg (33 lb) top; 2 kg (4.4 lb) tray
    Lift
    Gas spring, handle release
    Warranty
    2 years
    • 12 height levels, 13 to 52 cm (5.1 to 20.5 in) — the most stated in this hub, one more than the Vari's eleven
    • Wide 80×40cm (31.5 × 15.7 in) work surface plus a separate 65×30cm (25.6 × 11.8 in) keyboard tray
    • About €96 on amazon.de, against about €63 for the VonHaus; not listed on Amazon.com

    Best for: Anyone who wants to fine-tune a precise standing height rather than settle for a handful of fixed positions.

    Check price on Amazon
  • FLEXISPOT walnut 36 inch standing desk converter with a keyboard tray

    FLEXISPOT two-tier spring converter, 36 inch walnut

    A 36 in two-tier converter on a steel spring lift with thickened square tubing, rated 33 lb and 4.4 lb — and the only converter here with no height range on its listing.

    Amazon reference
    B0GZMQHC5S
    EAN
    0840521569088
    Manufacturer reference
    M57
    Width
    36 in (91 cm)
    Height range
    Not published
    Depth
    Not published, for either tier
    Load
    33 lb (15 kg) top; 4.4 lb (2 kg) keyboard tray
    Lift
    Mechanical steel-wire spring, patent pending
    Frame
    Reinforced steel, thickened square tubes
    Assembly
    Almost fully assembled; fit the keyboard tray
    Finish
    Walnut
    • A 36 in surface, which FLEXISPOT sizes for two monitors with room beside them
    • Mechanical steel-wire spring rather than a gas cylinder, with no pressure to lose
    • No height range published anywhere on the listing, where every other converter here states both ends of its travel

    Best for: A dual-monitor desk where a spring lift is wanted and the height can be checked on delivery.

    ≈ $125
    Check price on Amazon
  • SANODESK black two-tier standing desk converter with its keyboard tray extended

    SANODESK two-tier mechanical-spring converter, 32 inch

    A two-tier converter on a steel-wire mechanical spring rather than a gas cylinder, publishing both surface dimensions and a separate rating for each tier.

    Amazon reference
    B0H35V1GP6
    EAN
    0840521567329
    Manufacturer reference
    1
    Top surface
    31.5 × 16.3 in (80 × 41 cm)
    Keyboard tray
    28.3 × 12.2 in (72 × 31 cm)
    Height range
    4.7–19.6 in (12–50 cm)
    Load
    33 lb (15 kg) top; 4.4 lb (2 kg) tray
    Lift
    Mechanical steel-wire spring, patent pending
    Assembly
    Fit the keyboard tray with the supplied screws; screwdriver not included
    Converter weight
    Not published
    • A mechanical steel-wire spring rather than a gas cylinder, so there is no pressure to lose over years
    • Publishes both surfaces — 31.5 by 16.3 in on top, 28.3 by 12.2 in on the tray
    • The manufacturer reference on the listing is simply "1"

    Best for: A standard desk where the lift mechanism should have nothing in it that can leak.

    ≈ $110
    Check price on Amazon

All chair covers